Network & Hydraulics.
Pipe networks, hydraulic design and foul drainage: size your below-ground infrastructure. Carry the design flows through pipes, manholes, controls and culverts with confidence.
Pipe Sizing
Colebrook-White pipe capacity: size below-ground pipework for the design flow.
Manhole Sizing
Access chamber dimensioning: size manholes and inspection chambers for the network.
Gutter Sizing
Road gutter capacity analysis: check surface conveyance along kerb and channel.
Orifice Flow Control
Throttle and orifice discharge: set the limiting outflow that protects downstream receptors.
Pump Station
Foul and surface water pumping: size wet wells, duty pumps and rising mains.
Head Loss
Pipe and fitting loss calculation: trace the hydraulic grade line through the network.
Culvert Design
Culvert sizing and inlet control: check inlet- and outlet-controlled capacity at crossings.
Foul Drainage
Part H foul flow, DWF and pipe sizing: size foul branches and self-cleansing velocities.
No tools match that filter. Try “pipe”, “pump” or “culvert”.